EM-1 Machine
The Everything machine is FOUR machines in 1. The EM-1 can be used for grinding, sanding, and polishing stones. It has a 6" trim saw for cutting. It features attachments for metalsmiths to create jewelry, and a flexible shaft suitable for both carving and fine metal work. The arbor and motor sits on a waterproofed veneer stand with an accessory drawer.
Additional special features include:
Moveable Sprayers
Undermount Water Filtration System
Adjustable Magnifying Lens & Light
Patented Variable Speed Motor (1 Horsepower Variable Speed with 100% Torque)
Included with purchase:
6" Bonded Diamond Wheel 60 grit
6" Bonded Diamond Wheel 220 grit
6" Resin Bond Diamond Wheel 280 grit
6" Resin Bond Diamond Wheel 600 grit
6" Resin Bond Diamond Wheel 1200 grit
6" Resin Bond Diamond Wheel 3000 grit
Flex Shaft w/ 18pc accessory set and 3pc attachment heads
x2 Silversmithing spindles w/ x3 sanding and polishing wheels
DIALUX Superfinishing paste
DIALUX Polishing paste
Flat Lap w/ 6" magnetic felt pad and 6" magnetic 80 grit disc
Magnifying Glass Attachment
Jointed Light Attachment
x2 Detachable Wrist rests
Water Pump w/ tank filtration system
Splash guards
Moss Filtration Pads
x2 Brass Spray Nozzles
Spoke Wrench
Allen Wrench/Hex key
Crescent Wrench
6" Bonded Diamond Wheel, 80 grit
A 1.5-inches wide, 6-inch diameter metal grinding wheel for a 1-inch diameter arbor. Good for early stages of shaping stone cabochons or small specimens.
6" Bonded Diamond Wheel, 220 grit
A 1.5-inch wide, 6-inch diameter metal grinding wheel for a 1-inch diameter arbor. Good for middle stages of grinding cabochons or small specimens and removing bumps from the curve of the stone.
6" Resin Bond Diamond Wheel, 280 grit
A 1.5-inch wide, 6-inch diameter resin grinding wheel for a 1-inch diameter arbor. Good for middle stages of grinding cabochons or small specimens and removing bumps from the curve of the stone.
6" Resin Bond Diamond Wheel, 600 grit
A 1.5-inch wide, 6-inch diameter resin grinding wheel for a 1-inch diameter arbor. Good for middle stages of grinding cabochons or small specimens and smoothing the curve of the stone.
6" Resin Bond Diamond Wheel, 1200 grit
A 1.5-inch wide, 6-inch diameter resin grinding wheel for a 1-inch diameter arbor. Good for end stages of grinding cabochons or small specimens and smoothing the curve of the stone to prime for polishing.
6" Resin Bond Diamond Wheel, 3000 grit
A 1.5-inch wide, 6-inch diameter resin grinding wheel for a 1-inch diameter arbor. Good for end stages of grinding cabochons or small specimens and smoothing the curve of the stone to prime for polishing.
6" Metal Screw-On Flat Lap
A 6-inch diameter that attaches to the Right Arbor Shaft. Meant for magnetic flat lap attachments.
6" Magnetic Felt Pad
A 6-inch diameter, 1/8-inch-thick felt pad for polishing with a magnetic back. Attaches to 6" Metal Screw-On Flat Lap.
6" Magnetic Hard Disc, 80 grit
A 6-inch diameter, 1/8-inch-thick flat lap for grinding with a magnetic back. Attaches to 6" Metal Screw-On Flat Lap.
Brass Sprayer
A 2.5x1.5x1.25-inch brass attachment to the Rhino Lapidary water system. Applies constant water spray for grinding wheels.